Guild of Oregon Woodworkers upcoming events

Project Build - Afternoon (06 May 2026)

Wed, 06 May 2026 20:00:00 GMT

Shop attendant: Heidi McNamee

Join us in making projects to benefit our guild and the wider community

Requirements:

Introduction to Guild Safety (Core Tool Certification is not required)

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

EDG - Intro to Wood Talk and Milling 26-2 (06 May 2026)

Thu, 07 May 2026 00:00:00 GMT

Intro to Wood Talk and Milling

Instructor: Mark Allen

Class Assistant: Mar Beck

Students: 4 spaces

Prerequisite: Core Tool Certification

The first step in any project is buying wood and milling it to yield flat, dimensional boards of the proper thickness and with all angles at 90 degrees. This class is designed to teach the proper methods and sequence for this milling process when using machines (vs. hand tools). Our focus will be on the preliminary milling that must be done for the wood to be ready for final project milling. Since it is where EVERY project must begin, it is an essential skill for EVERY woodworker.

In the class you will learn basic terminology that is used to describe wood; receive information on wood grain and movement; participate in the demonstrated milling of lumber with each machine; and work with a team of fellow students to complete a small milling project. You will leave the class knowledgeable and comfortable with the use of equipment for milling.

Students should bring these items: pencil, combination square, and tape measure.

You must have the following Personal Protection Equipment (PPE):

ANSI Z87.1 rated safety glasses if using the machine room.
N95 or better dust mask. These are generally optional but may be required by the Shop Attendant if they determine the air quality will require it.
Hearing protection

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19, flu or RSV.

Class Cancellation Policy

Cancelled - Project Build - evening (06 May 2026)

Thu, 07 May 2026 00:00:00 GMT

CANCELLED

Shop attendant: Nick Stocco (612-252-8919)

Join Project Build on a Wednesday evening for an opportunity to work with and learn from other members of the Guild. You will have fun, too.

Requirements:

Intro to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

Project build is currently working on:

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

EDS - ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION 26-10 (07 May 2026)

Thu, 07 May 2026 16:00:00 GMT

ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION

Instructors - Scott Demming and Mark Mattson

Prerequisites: Core Tool Certification

This class is about safe use of router and router table and is designed to provide you with Certification on these machines.

The router is one of the most versatile tools in the shop. It is commonly used to do routine cutting of slots with a straight bit, but has great flexibility in edge profiling and in use with jigs. The router is a simple motor 1, 2¼ or 3½ horsepower with a changeable collet that can hold thousands of bit styles. It can be mounted in a table for exquisite control or hand held when the project is too large to get onto the table.

If you are not confident in your mastery of this machine, then this is the class for you. We will discuss best practice for each operation, you will see it demonstrated, and then you will have the opportunity to perform the procedure yourself, hands on. By the end of the class, you should feel comfortable that you can operate these machines safely. Materials will be provided.

Bring your PPE.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

CANCELLED - Thursday Morning Open Shop (07 May 2026)

Thu, 07 May 2026 16:00:00 GMT

CANCELLED - OPEN SHOP

Master SA: Joe Fram 805-235-6690

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

Members who have not been active shop users in the last year (365 days) are required to complete a brief shop and tool re-certification with a Core Tools instructor prior to participating in Open Shop. These are done on an individual basis at no cost; email recertification@guildoforegonwoodworkers.org to schedule.

Please review the Material Guide and bring all consumables required for your project. The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measure

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

On the following registration form (after you click the Register button) there are two fields for you to enter the time you plan to arrive at the shop and an estimate of how long you will be there. This information will help the SA determine if drop in users can be accommodated.

The Shop Attendant may allow drop in users if there is room.

There are two CNC machines available for use by reservation for the Open Shop Session. When completing the registration form, select the machine you wish to reserve. The user must be certified or have completed the training and have a certified mentor present while they are using the machine. Make arrangements for a mentor before registering to use the CNC machine. The mentor does not need to register for the session.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with Flu, RSV or COVID-19.

Thursday Afternoon Open Shop (07 May 2026)

Thu, 07 May 2026 20:00:00 GMT

OPEN SHOP

Journeyman SA: Dave Smith 503-318-6697

Apprentice SA: Doug Holmgren 503-750-4218.

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

EDS - CORE TOOL CERTIFICATION - EVENING 26-22 (07 May 2026)

Fri, 08 May 2026 00:00:00 GMT

Instructor - Stuart Brown

Assistant - Ezra Richards

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

The instructor will demonstrate using each tool and discuss safe practices. There will be the opportunity to practice using each tool. By the end of the class, one should feel comfortable operating each tool safely. Upon successful completion, the instructor will certify the member on the 7 core tools.

Materials will be provided.

Do not register for this 2 session class unless you are able to attend both sessions. We cannot reschedule you if you are not able to attend both sessions and no refunds will be given for missed sessions.

Students should bring these items: Personal and required PPE, pencil, and tape measure. Bring a copy of this document, either digitally or printed, Core Tool Handout . Bring a combination square, if you have one. Don't go out and buy a cheap one for the class. We have plenty to borrow and we'll discuss the benefits of investing wisely in a quality square.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with Flu, RSV or COVID-19.

Class Cancellation Policy

Box SIG (07 May 2026)

Fri, 08 May 2026 00:30:00 GMT

BOX SIG

Bring your boxes for show and tell! Bring your questions for help on solving problems. After the program, those who wish to continue the conversation will walk up the street for some food & drink.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Morning Open Shop (08 May 2026)

Fri, 08 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Bryce Stack 510-304-0432

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Toy Build (08 May 2026)

Fri, 08 May 2026 20:00:00 GMT

SA: Joe Fram

Come build toys with us. We build all sorts of toys from very simple to very complex. No experience necessary.

Requirements:

Introduction to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
N95 or better dust mask. These are generally optional but may be required by the Shop Attendant if they determine the air quality will require it.
Hearing protection

Staying home when sick:

Members are encouraged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of contagious illness, especially those associated with flu, RSV, or COVID-19.

Morning Open Shop (09 May 2026)

Sat, 09 May 2026 16:00:00 GMT

OPEN SHOP

Master SA: George Bradley 503-803-3035

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Afternoon Open Shop (09 May 2026)

Sat, 09 May 2026 20:00:00 GMT

OPEN SHOP

Journeyman SA: Timothy Currell 503-953-0651

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

EDS Getting Started-Hands On With Portable Power Tools 26-14 (10 May 2026)

Sun, 10 May 2026 16:00:00 GMT

Getting Started – Shop Safety for Beginners

Instructors: Jim Meyer

Class Assistant: John Augsburger

Prerequisite: Introduction to Guild Safety

The Getting Started class is a continuation of the safety process in good woodworking practices taught in the Intro to the Guild class.

Getting Started is a required class for those needing experience with the safe and appropriate use of portable power tools, prior to starting the path to the Guild’s Shop Certification classes.

This is a four-hour class, with ~2½ hours of practice with a jig saw, a trim router, a random orbital sander, drill motors (battery), and installing their accessories.

Curriculum includes:

Drawing up a plan and cutting list
Wood characteristics, hidden hazards
Simple approaches to accuracy,
Specific tool safety techniques.

The final section of the class will be using these tools to create a cutting board. Material provided by the Guild.

Please review the Guild’s PPE (personal protection equipment) policy from the Intro to the Guild class.

Have all your PPE for this class. Approved wrap around safety glasses, hearing protection, a dust mask (these tools are not connected to the dust collection system).

Class size is 6 students. Each student will have their own area in the Shop with each tool to be demonstrated. No tool sharing. Safe distancing.

Dress appropriately for working in the Shop. (hair tied back, no dangling sleeves, bracelets, strings etc)

The handouts will be reviewed in class.

These items will be used during class pencil, combination square or similar, razor knife, tape measure, notebook, piece of chalk, blank piece of paper for drawing and a straight edge.

Please bring your own PPE and pencil.

Upon completion of Getting Started, members can sign-up for the Core Tool Certification classes.

For more information on the Shop Certification process:https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events when experiencing symptoms of a contagious illness, especially those associated with flu or COVID-19. (If you've tested positive, please wait until cleared to return to the shop).

Class Cancellation Policy

Morning Open Shop (10 May 2026)

Sun, 10 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Volodymyr Babin 919-523-3798

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Monday Morning Open Shop (11 May 2026)

Mon, 11 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Paul Fischer 503-913-6313

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

EDS - CORE TOOL CERTIFICATION - EVENING 26-23 (11 May 2026)

Tue, 12 May 2026 00:00:00 GMT

Instructor - John Mafrica

Assistant - Rick Martin

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Basics of Fine Woodworking 26-2 (11 May 2026)

Tue, 12 May 2026 00:30:00 GMT

Basics of Fine Woodworking

Prerequisites: Intro to Guild Safety & Core Tool Certification

Instructors: Multiple

Assistants: Chris Cardoza

Students: 6 maximum

This course is designed for beginning woodworkers who have completed Core Tool Certification and:

1. Would like to build confidence using these tools.

2. Desire introductory knowledge on the process of bringing a project from concept through the process of woodworking, to applying a finish.

This class consists of 7 sessions offered on Monday evenings. Students are expected to attend all 7 sessions. There will not be any makeup sessions offered for missed classes. Each session covers specific aspects of woodworking, presented in the typical project order of operations.

Instructors will provide information and hands-on practice on the process of woodworking, through the construction of a simple box that you will work on through each session to completion. The objective is the acquisition of knowledge and skills of the process, rather than the box, though you will have a constructed box in the end to remind you of the process and your abilities.

The session topics are as follows:

Session One: Design and Layout

- Hands-on: drawings, layout, modeling, construction – table saw (cross cutting) and bandsaw (resawing)

Session Two: Understanding Wood

- Hands-on: milling – jointer, tablesaw (ripping), planer

Session Three – Joinery

- Hands-on: tablesaw (crosscutting and cutting grooves), bandsaw, layout

Session Four – Hand Tools

- Hands-on: layout, handsaw, coping/fret saw, chisels, block plane

Session Five – Work Session

- Hands-on: complete box to to point of assembly

Session Six– Assembly and Glue-up

- Hands-on: table saw (cutting a rabbet), surface prep (sanding), hand plane and shooting board, clamps, glue

Session Seven – Finishing

- Hands-on: applying finish on sample boards, shellac finish on box

Materials will be provided.

PPE required: hearing protection, safety glasses, dust mask (as needed), closed-toed shoes.

Students should also bring: a fine point mechanical pencil and a tape measure. If you have your own combination square and marking knife, bring them, however, there are plenty of these in the Studio to use if you do not own one. Also bring your block plane if you have one. Do not buy one for this course.

Please contact Pat Shuff (pat.shuff@guildoforegonwoodworkers.org) with questions.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

Monthly IT meeting (11 May 2026)

Tue, 12 May 2026 02:00:00 GMT

Guild IT team

Monthly meeting to discuss all things IT - second Monday of each month

All members are invited to participate in the It meetings.

The link for the Zoom IT Meeting is:

https://us06web.zoom.us/j/81897494351?pwd=XaWua7Kq2aZxa2hRobW5bMH5vq7Itv.1

Meeting ID/Passcode 818 9749 4351 / 588394

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-21 (12 May 2026)

Tue, 12 May 2026 20:00:00 GMT

Instructor - Dennis Dolph

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Guild Board of Directors Meeting -online (12 May 2026)

Wed, 13 May 2026 00:00:00 GMT

Guild Board of Directors
may 12, 5:00-6:00

All members are invited to participate in the board meetings but are unable to vote.

The link for the Zoom Board Meeting is:

https://us06web.zoom.us/j/87906271746?pwd=SbVCExmBZEMI6bkWqbCKASbm6uST8c.1

Chair Making SIG (12 May 2026)

Wed, 13 May 2026 01:30:00 GMT

CHAIR MAKING SIG

Leader: Simon Bosley

Register for this Free event

Are you interested in making chairs?

Chairmaking is a fascinating branch of woodworking with many special considerations. In addition to aesthetics, a good chair needs to be comfortable and strong enough to withstand the forces and loads to which it will be subjected. Chairmaking topics range from use of templates, angled joinery, curved parts, steam bending and many others.

We are exploring the idea of a Special Interest Group, or SIG, for chair makers. This would be a forum dedicated to the building of chairs where we can share ideas, learn new techniques, and help each other with projects and challenges.

Whether you are just getting started, already building chairs, or just interested in building chairs, we want this group to support your needs and interests.

If you would like to participate in this group, register this meeting for this event or contact Simon Bosley at simon.bosley@comcast.net

Please stay home if you are sick to protect our community from illness. Thank you.

Morning Open Shop (13 May 2026)

Wed, 13 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Greg Weigel 503-421-4838

Journeyman SA: Hank Kaplan 503-984-0845

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Project Build - Afternoon (13 May 2026)

Wed, 13 May 2026 20:00:00 GMT

Shop attendant: Heidi McNamee

Join us in making projects to benefit our guild and the wider community

Requirements:

Introduction to Guild Safety (Core Tool Certification is not required)

Liability Waiver

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

EDG - Intro to Hand Tools 26-3 (13 May 2026)

Thu, 14 May 2026 00:00:00 GMT

Introduction to Hand Tools for Beginners

Instructor: Paul Barker

Class Assistant: JJ Hoffman

Prerequisites: Introduction to Guild Safety

Skill Level: Beginner

General Description

This class will introduce students to the most common hand tools focusing primarily on hand saws, chisels and hand planes. Instructor will provide demonstrations on use, set up and anatomy of tools. Students will complete exercises using the tools to have better understanding of their uses.

Tools, Equipment or Materials needed: Guild will provide Hand saws, hand planes and chisels and wood to practice exercises with (soft wood like alder or pine).

Students should bring their Personal Protective Equipment.

If you have a pocket square, tape measure, 6” rule, speed square, bevel gauge, marking knife, chisels, block plane, etc. you can bring those. They are also available at the Studio.

A Guild Scholarship Program is available for those who meet scholarship criteria.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

Project Build - evening (13 May 2026)

Thu, 14 May 2026 00:00:00 GMT

Shop attendant: Mike Sandmann

Join Project Build on a Wednesday evening for an opportunity to work with and learn from other members of the Guild. You will have fun, too.

Requirements:

Intro to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

Project build is currently working on:

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Afternoon Open Shop (14 May 2026)

Thu, 14 May 2026 20:00:00 GMT

OPEN SHOP

Journeyman SA: Merle Mattson 503-806-3190

Apprentice SA: Mark Hinrichs 503 860-1564

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Core Tools Instructors Meeting (14 May 2026)

Thu, 14 May 2026 22:00:00 GMT

Core Tools Instructors Meeting

EDS - CORE TOOL CERTIFICATION - EVENING 26-22 (14 May 2026)

Fri, 15 May 2026 00:00:00 GMT

Instructor - Stuart Brown

Assistant - Ezra Richards

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

CNC SIG (14 May 2026)

Fri, 15 May 2026 02:00:00 GMT

CNC SIG

If you are interested in learning more about CNC in woodworking join us. Beginner or advanced. CNC is a rapidly developing method of woodworking that is providing new opportunities for woodworkers. The SIG is a great way to develop relationships with other CNC users, share your creative ideas and propose ways to enhance the expertise of Guild's CNC community.

NOTE: The SIG has a "lead." But it is largely a self organized group. This means everyone gets to contribute toward setting topics for discussion, participation and keeping the group active. If you want a discussion on a topic, send your ideas ahead of time to the SIG lead.

Register and join us. For 2026, we meet on the 2nd Thursdays of Jan, Mar, May, Jul, Sep and Nov from 7 - 9 PM at the Guild Studio.

Staying Home When Sick:

Morning Open Shop (15 May 2026)

Fri, 15 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Bryce Stack 510-304-0432

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

EDG-Fundamentals of Veneering 26-1 (15 May 2026)

Fri, 15 May 2026 16:00:00 GMT

Fundamentals of Veneering

Instructor - Chip Webster

Chip Webster has been restoring fine old furniture for over 20 years, often requiring

repairing or making new veneer panels for doors, cabinet tops and other components.

Class Assistant - TBD

Prerequisites:

Core Tool Certification
Router Certification

Skill Level: Beginner, Intermediate

Class Goals: to learn the fundamentals of veneering using a variety of clamping systems and process techniques.

Veneers are often used to apply expensive exotic woods or woods with figure or a beautiful grain pattern to a less expensive board. They are also used to create decorative elements, such as inlaid pictures or banding, in projects.

In this workshop we will make a small panel to take home suitable for use as a lid for a small box. We will explore the use of commercially available veneers and shop sawn veneers, where to use each and how to apply them. Different substrates and adhesives will be discussed and used during the class. Cutting and jointing veneer, and the process of securing and clamping, including a vacuum press, will be practiced. We will also make various edge treatments and discuss the requirements and process to produce a curved panel.

Veneer, tape and other materials will be provided. Students will be required to bring a #11 XActo knife or Olfa utility knife.

Students should also bring, if they have available, a sharp low angled block plane and several 12" F style clamps (Harbor Freight is a great source for the F clamps at a very reasonable cost).

We will be working with a bandsaw, jointer, planer, drum sander, router and table saw in this workshop.

Students should plan to bring lunch or visit a local establishment.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu and COVID-19.

Class Cancellation Policy

Toy Build (15 May 2026)

Fri, 15 May 2026 20:00:00 GMT

SA: Dennis Brown

Come build toys with us. We build all sorts of toys from very simple to very complex. No experience necessary.

Requirements:

Introduction to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
N95 or better dust mask. These are generally optional but may be required by the Shop Attendant if they determine the air quality will require it.
Hearing protection

Staying home when sick:

EDS - CORE TOOL CERTIFICATION - EVENING 26-24 (15 May 2026)

Sat, 16 May 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-25 (16 May 2026)

Sat, 16 May 2026 20:00:00 GMT

Instructor - JJ Hoffman

Assistant - Bill Tainter

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - BEGINNING ROUTER INLAY 26-1 (16 May 2026)

Sat, 16 May 2026 20:00:00 GMT

Instructor: Carol Boyd

Class Assistant: TBD

Students: 4

Prerequisites: All 3 certifications must be completed prior to class

Intro to Guild Safety
Core Tools
Router Certification

Learn how to do a simple inlay. You will create an inlay in a box using a template and a router. A pre-cut box kit will be provided to all students and at the end of the session, you will go home with a glued up box with an inlay.

If you prefer, you can bring your own piece for the inlay – it must be able to hold a 2” inlay. Please contact the instructor ahead of time if you want to do this.

Students: Please bring your PPE, small square, and pencil.

Guild: All materials will be provided.

Tools Used: Hand held Router

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Class Cancellation Policy - cancel 7 days in advance for full refund (exceptions for illness or emergency)

EDS - INTRO TO GUILD SAFETY 2026-10 (17 May 2026)

Sun, 17 May 2026 16:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Welcome to the Introduction to Guild Safety class. For every Guild member wishing to take Education classes, use the Guild shop for personal projects, or participate in the Community Project sessions, this is a required class, regardless of experience or skill level.

This class is presented by the Education and Membership Team. In addition to important information about shop safety, we will provide an overview of Guild Education, Community Projects and Open Shop programs. You will also learn about how to volunteer because the Guild only succeeds with active volunteers!

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Print out and bring assigned Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

Morning Open Shop (17 May 2026)

Sun, 17 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Volodymyr Babin 919-523-3798

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Beginner Open Shop (17 May 2026)

Sun, 17 May 2026 20:00:00 GMT

Beginner Open Shop

Shop Attendant: Bob Mack

Shop Assistant: Bill Burky

Description:

These Shop sessions are dedicated for new members to the guild. These are special Open Shops for new woodworkers on the first and third Sunday afternoons of each month. The goal is to allow new and aspiring woodworkers space to build their confidence and safely use machines under dedicated supervision on their personal projects.

Two experienced volunteers will be available to provide guidance as needed that will lead to the successful completion of their project. They will be available to discuss plans, review cut lists, examine proposed steps to complete the project, and assist with set up and safe operation of the machines that were presented in the Core Tools class.

Participants will bring their materials (lumber and consumables) and their project plan (e.g., simple drawing and project ideas) to the shop, and will pay standard shop fees.

The intent is to create a safe, collaborative environment where beginners can obtain direction on their project and will have the opportunity to learn from mentors and peers attending the session. Over the course of a few sessions, we anticipate that new woodworkers will build the necessary skills and confidence that will allow them to comfortably work in a standard open shop session.

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

Please review the Material Guide and bring all consumables required for your project.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:
- Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

EDG - Sharpening Chisels and Plane Irons 26-4 (17 May 2026)

Sun, 17 May 2026 20:00:00 GMT

Instructor: Tim Moore

Class Assistant: Mark Allen

Students: 4

Prerequisite: Intro to Guild Safety

This four-hour class is designed to bring your chisels and hand planes up to an acceptable level of sharpening, good enough to get back to woodworking quickly. We will focus on how we sharpen the Guild's own tools, primarily using our Veritas sharpening jig since it is relatively simple and the results are repeatable. We will also briefly cover other approaches, such as sandpaper (Scary Sharp®) and a basic jig, such as the Eclipse and its clones. You are encouraged to bring your own tools in to sharpen and if time permits, we can talk about other sharpening challenges, such as small or skewed blades, scrapers, etc.

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Evening Open Shop (17 May 2026)

Mon, 18 May 2026 00:00:00 GMT

OPEN SHOP

Journeyman SA: Hiram Harris 503-381-2768

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Shop and Studio Maintenance (18 May 2026)

Mon, 18 May 2026 17:00:00 GMT

Shop & studio MAINTENANCE

Carol Boyd

Description:

Volunteers are welcome at any time during that period that fits with your work and home life.

Join us for a daytime maintenance session. Participants do not need special knowledge and skills. We will have a mixture of beginners and experienced members learning more about our power tools while keeping our shop in working order.

Requirements:

Introduction to Guild Safety (core tool certification is not required).

Liability Waiver

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

EDS - CORE TOOL CERTIFICATION - EVENING 26-23 (18 May 2026)

Tue, 19 May 2026 00:00:00 GMT

Instructor - John Mafrica

Assistant - Rick Martin

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Basics of Fine Woodworking 26-2 (18 May 2026)

Tue, 19 May 2026 00:30:00 GMT

Basics of Fine Woodworking

Prerequisites: Intro to Guild Safety & Core Tool Certification

Instructors: Multiple

Assistants: Chris Cardoza

Students: 6 maximum

This course is designed for beginning woodworkers who have completed Core Tool Certification and:

1. Would like to build confidence using these tools.

2. Desire introductory knowledge on the process of bringing a project from concept through the process of woodworking, to applying a finish.

The session topics are as follows:

Session One: Design and Layout

- Hands-on: drawings, layout, modeling, construction – table saw (cross cutting) and bandsaw (resawing)

Session Two: Understanding Wood

- Hands-on: milling – jointer, tablesaw (ripping), planer

Session Three – Joinery

- Hands-on: tablesaw (crosscutting and cutting grooves), bandsaw, layout

Session Four – Hand Tools

- Hands-on: layout, handsaw, coping/fret saw, chisels, block plane

Session Five – Work Session

- Hands-on: complete box to to point of assembly

Session Six– Assembly and Glue-up

- Hands-on: table saw (cutting a rabbet), surface prep (sanding), hand plane and shooting board, clamps, glue

Session Seven – Finishing

- Hands-on: applying finish on sample boards, shellac finish on box

Materials will be provided.

PPE required: hearing protection, safety glasses, dust mask (as needed), closed-toed shoes.

Please contact Pat Shuff (pat.shuff@guildoforegonwoodworkers.org) with questions.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

EDS - PANTOROUTER CERTIFICATION CLASS 26-05 (19 May 2026)

Tue, 19 May 2026 20:00:00 GMT

PantoRouter Certification Class

Instructor: Ken Fairfax
Class Assistant: Darrell Duffy

Prerequisites: Core Tool Certification and Router Certification

Cost: $90

The PantoRouter™ is an innovative tools that utlizes a router to create highly precise joinery, including mortise and tenon joints, dovetail joints, box joints, and other specialized joint types.

In this class, students will cover both safety as well as the basics of using the PantoRouter™ to create accurate, reproducible mortise and tenon joints. During the class the 4 students will jointly create a table base using mortise and tenon joinery while learning how to set up, calibrate, and safely operate the PantoRouter™. While completing this class, each student will practice setting up the machine for a cut, aligning work pieces, and safely cutting multiple joints.

After successfully completing the class, students will be certified to use the PantoRouter™ during Open Shop periods. While the class uses mortise and tenon joints for teaching purposes, PantoRouter™ users can consult the manual as well as the extensive online library at PantoRouter.com to learn how to apply their skills to other joints, including dovetail and box joints.

Students should bring personal protective equipment, including safety goggles and hearing protection.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

Afternoon Open Shop (19 May 2026)

Tue, 19 May 2026 20:00:00 GMT

OPEN SHOP

Journeyman SA: Merle Mattson 503-806-3190

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

General Meeting - May (19 May 2026)

Wed, 20 May 2026 02:00:00 GMT

7 PM @ The Studio

Agenda TBD

https://us06web.zoom.us/j/96184696029?pwd=MWZOUEZsejJua0pJY2tvbjVSVlFuZz09

Hint: The link never changes for the monthly meeting. It is the same every month.

EDG - PREP DAY Stake Leg Stool class (20 May 2026)

Wed, 20 May 2026 16:00:00 GMT

Prep for Stake Leg Stool class

Project Build - Afternoon (20 May 2026)

Wed, 20 May 2026 20:00:00 GMT

Shop attendant: Heidi McNamee

Join us in making projects to benefit our guild and the wider community

Requirements:

Introduction to Guild Safety (Core Tool Certification is not required)

Liability Waiver

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

Project Build - evening (20 May 2026)

Thu, 21 May 2026 00:00:00 GMT

Shop attendant: Mike Sandmann

Join Project Build on a Wednesday evening for an opportunity to work with and learn from other members of the Guild. You will have fun, too.

Requirements:

Intro to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

Project build is currently working on:

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

IT Open Forum (20 May 2026)

Thu, 21 May 2026 00:00:00 GMT

This is an Open Forum to discuss the Guild's IT offerings

Come if you are:

Interested, have questions, are experiencing difficulties or have inputs/requests related to Guild's IT services
Have difficulties being productive with IT services
Skilled in IT and want to volunteer

The Guild's IT services are:

Website: Web pages, Class Registration, Calendar, Forums, Payments, Cameras
Google stuff: Gmail (email), Goggle Drive (documents), Google Docs, Google Sheets
Network, Wifi, TV Projectors, Printers, Door Access/Alarms
Shop computers: Main shop, Studio shop, SA and Instructor tools

If you are interested in a specific topic:

Let us know ahead of time, so we can come prepared or even make a short Tutorial that can help everyone else.
Send an email to: it@guildoforegonwoodworkers.org

__________________________________________________________________________________________

Staying Home When Sick:

Morning Open Shop (21 May 2026)

Thu, 21 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Dave Smith 503-318-6697

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

Thursday Afternoon Open Shop (21 May 2026)

Thu, 21 May 2026 20:00:00 GMT

OPEN SHOP

Master SA: Tom Nelson 503-318-7642

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

EDG - PREP DAY Stake Leg Stool class (21 May 2026)

Thu, 21 May 2026 20:00:00 GMT

Prep for Stake Leg Stool class

Education Team Orientation and Training (21 May 2026)

Fri, 22 May 2026 01:00:00 GMT

Education Team (Class Assistants and Instructors) Orientation and Training

Have you wondered how to become a Class Assistant (CA)? Are you interested in becoming an Instructor? The Guild has opportunities for all levels of woodworkers to volunteer in the Education Program, even if you have not yet completed Core Tool certification.

If you have considered becoming a CA or Instructor, are a current CA or Instructor, or just want to learn more about these roles, please complete this short application (CAs), and register for this informative Orientation and Training session.

If you have questions, please email kim.montagriff@guildoforegonwoodworkers.org.

Toy Build (22 May 2026)

Fri, 22 May 2026 20:00:00 GMT

SA: Ken Fairfax

Come build toys with us. We build all sorts of toys from very simple to very complex. No experience necessary.

Requirements:

Introduction to Guild Safety (core tool certification is not required)

Liability Waiver

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
N95 or better dust mask. These are generally optional but may be required by the Shop Attendant if they determine the air quality will require it.
Hearing protection

Staying home when sick:

EDG - Make Your First Cutting Board 26-2 (22 May 2026)

Fri, 22 May 2026 20:30:00 GMT

Instructor: Pat Shuff

Class Assistant: Nick Stocco & Siobhan Murphy

Students: 6 spaces

This is an introductory hands-on class in which students will learn to make a laminated face-grain cutting board. During the two, 3-hour class sessions, students will mill the wood from raw boards, glue up the boards for drying between classes, watch demonstrations of the milling and shaping steps, and then work on their own boards. Students will get hands-on practice with the table saw, planer, router, band saw (optional), disc, belt and spindle sanders, and router table (optional) to shape their cutting board.

The goal is to have a rough cutting board drying overnight and a finished cutting board to take home at the end of class. In some cases, final sanding and application of mineral oil finish will be done at home. In exceptional cases where more shop time is needed for use of power tools, we will try to accommodate students with a shop session when they can use the shop to finish up their board.

Wood will be provided. Remember to bring your Personal Protective Equipment - eyes, ears, and lung protection.

Prerequisites: Intro to Guild Safety and Core Tool Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Please register online and remit payment at once. Your registration is not complete without payment.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV and COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-24 (22 May 2026)

Sat, 23 May 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Morning Open Shop (23 May 2026)

Sat, 23 May 2026 16:00:00 GMT

OPEN SHOP

Master SA: George Bradley 503-803-3035

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection
Dust mask: wearing the mask is optional although the SA may determine it is needed

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.

Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

EDG - STEVE POLAND CURVED STAKE-LEG STOOL 26-1 (23 May 2026)

Sat, 23 May 2026 16:00:00 GMT

BUILD A SIMPLE STAKE-LEG STOOL

Instructors: Jim Spitzer & Carol Boyd

Class Assistant: TBD

Students: 6

Prerequisites:

Intro To Guild Safety

Core Tool Certification

Router Certification

This stool was developed and designed by Guild member Steve Poland. In this class, we will discuss various design options for your future stake-leg stool projects. The Instructor will describe a range of approaches to forming cylindrical tenons that are used for creating accurate and strong cylindrical mortise and tenon joints without use of a lathe. Then you will create your own simple stool.

You will have the option of finishing with the simple plank style or using a curved track router jig to create the curved seat version. We should have a couple species options, but we won’t know exactly what is available until just prior to the class.

Basic operations will include:

- Use a table saw fixture to create 8 sided legs from square stock.

- Use a router table jig to form precise diameter round tenons.

- Use band saw to slit wedge slot and drill to bore stress relief at bottom of slot.

- Use an angled fixture on drill press to create splayed mortises.

- Use a curved rail router sled jig to carve a radiused seat top.

- Use band saw to cut wedges for locking the tenons in mortise

- Use a flush-cut saw and block plane to trim tenon flush with seat.

- Use a height marking fixture to set up leg length cut with Japanese saw.

- Use block plane to champher edges of seat and bottom of legs.

- Finish sanding with random orbit sander.

Students bring: PPE. and if you have them, bring a pocket square, tape measure, 6” rule, chisels, and block plane.

If needed, check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Class Cancellation Policy - full refund when cancelled with 7 days prior notice, or emergency. Please see policy for details.

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-25 (23 May 2026)

Sat, 23 May 2026 20:00:00 GMT

Instructor - JJ Hoffman

Assistant - Bill Tainter

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of two 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Make Your First Cutting Board 26-2 (23 May 2026)

Sat, 23 May 2026 20:30:00 GMT

Instructor: Pat Shuff

Class Assistant: Nick Stocco & Siobhan Murphy

Students: 6 spaces

Wood will be provided. Remember to bring your Personal Protective Equipment - eyes, ears, and lung protection.

Prerequisites: Intro to Guild Safety and Core Tool Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Please register online and remit payment at once. Your registration is not complete without payment.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV and COVID-19.

Class Cancellation Policy

Morning Open Shop (24 May 2026)

Sun, 24 May 2026 16:00:00 GMT

OPEN SHOP

Journeyman SA: Volodymyr Babin 919-523-3798

Requirements:

Shop Time

Core tool certification (for machine room use)

Liability Waiver

There is a high demand for this event. If you are unable to attend, please cancel your reservation immediately so another member can register and use the shop.

The Shop Attendant will wait 30 minutes after the start of the shift. If nobody shows up, the SA will close the shop and leave, unless notified in advance of a late arrival.

The Shop Attendant may allow drop in users if there is room.

You must have the following safety equipment:

ANSI Z87.1 rated safety glasses if using the machine room.
Hearing protection

Dust mask: wearing the mask is optional although the SA may determine it is needed

Staying Home When Sick:

EDG - STEVE POLAND CURVED STAKE-LEG STOOL 26-1 (24 May 2026)

Sun, 24 May 2026 20:00:00 GMT